RemoteTx Manual
remotetx.net

Technical reference

For developers and for troubleshooting unusual loggers.

CAT commands handled#

EasyConnect answers as a Kenwood TS-480 (ID020;). Commands end with ;.

CommandRead replySet
ID;ID020;—
PS;PS1;ignored
AI;AIn;AIn; turns on pushing IF; when the state changes (per client)
FA; FB;11-digit Hzsets the VFO
FR; FT;0 / 1FR sets the RX and TX VFO (cancels split); FT sets the TX VFO
MD;mode codesets the mode
IF;38-character TS-480 status—
TX; RX;—PTT on / off
RT; XT; RC; RU; RD;RIT / XIT stateRIT / XIT on/off, clear, step
KY; / KY text;KY0;CW text (sent to the radio's keyer where supported)
AG0;AG0nnn; AF gainstored
FW;FWnnnn; filter width for the current modestored per mode
SH; SL;SHnn; / SLnn; high / low cutstored
RM; / RMn;RM10000; meter (SWR 1:1, no ALC)selects the meter
VX;VX0; / VX1;stored
RG;RGnnn; RF gainstored
SQ0; SQ1;SQ0nnn; squelchstored
KS; PC; SM;speed / power / meterstored

Anything else is logged as UNKNOWN and answered with ?; (unless Reply ?; to unknown commands is off).

HRD Rig Control requests handled#

The HRD Rig Control server answers as HRD Rig Control with one radio, a TS-480. Both HRD wire formats are accepted: the v5/v6 binary format used by current HRD versions, and the older v4 text lines. Requests may carry a context prefix such as [1]; several requests in one message (TAB-separated) get their replies back the same way.

RequestWhat it does
get id, get version, get context, get radios, get radioIdentify the server and the radio (1:TS-480)
get frequency, get freqx, get frequenciesRead the frequency (both VFOs for get frequencies)
set frequency-hz, set frequencies-hzTune the radio
get dropdowns, get dropdown-list, get dropdown-text, get modeRead the mode (the Mode dropdown)
set dropdown Mode …Change the mode
get split, set splitRead or set split
get buttons, get button-select, set button-selectThe TX, Split, VFO A, VFO B, A / B, RIT and XIT buttons
get sliders, get smeter-mainAnswered with empty or zero values (not emulated)

Anything else is logged as UNKNOWN.

Default ports#

ServiceDefault
TS-480 CAT (TCP)127.0.0.1:12500
UDP JSON feed0.0.0.0:12600
Radio link (WebSocket)127.0.0.1:12700
WSJT-X UDP (to loggers)127.0.0.1:2237
N1MM Logger+ broadcasts127.0.0.1:2333
HRD Rig Control server127.0.0.1:7809
© RemoteTx® · remotetx.net · Manual built 2026 · Updated 2026-11-19