RemoteTx Manual
remotetx.net

Icom Audio Player troubleshooting

Windows or macOS won't start the app#

The installers aren't code-signed.

  • Windows: when SmartScreen warns, choose More info → Run anyway.
  • macOS: right-click the app in Applications and choose Open. On macOS 15 or later use System Settings → Privacy & Security → Open Anyway. See Installing.

No recordings are found#

  • The player doesn't scan drives by itself. Press OPEN… and pick the folder on your computer you copied the card to.
  • Check the copy kept the radio's layout: IC-xxxx\Voice\YYYYMMDD\YYYYMMDD_HHMMSS.wav. Recordings made with the radio's voice recorder go in Voice; other files are ignored.
  • Reading straight from the card instead? Make sure the computer sees it (it shows up in Explorer or Finder), then pick it with OPEN… or use SD CARD → SCAN.

New recordings don't show up#

Copy the card's contents into the same folder on your computer again, then press REFRESH on the PLAY FILES screen. See Adding new recordings later.

A card shows NOT IN#

It's a linked SD card that isn't inserted. Insert it and it's picked up again; meanwhile it's skipped. To forget it, select it on the SD CARD screen and press UNLINK. Nothing on the card is deleted. Copying the card to your computer avoids this.

Bookmarks show MISSING#

The bookmarked recording is on an SD card that isn't inserted. Put it back and the bookmark plays again, or copy the card to your computer and open the copy instead.

A folder or file I expected isn't listed#

  • Check the FILTER key and the SEARCH key. If either is lit or yellow, a filter or search is hiding recordings. FILTER › Show Everything and QUICK › Clear Search (or pressing the yellow SEARCH key) turn them off.
  • Check All radios ▾ in the title bar isn't set to one radio.
  • Press REFRESH after copying new recordings onto a card that's already open.

Times are off by several hours#

The player assumes the radio's clock is UTC. If your radio is set to local time, set QUICK › Radio Clock Is to LOCAL. Use the UTC TIME / LOCAL TIME key to choose how times are shown.

Transcription doesn't start or fails#

  • The first voice transcription downloads the Whisper model (~250 MB, or ~80 MB for BASE) from Hugging Face. The computer needs an Internet connection that time only.
  • On a slow computer, switch QUICK › Speech Model to BASE.
  • RTTY and data-mode recordings are skipped on purpose.
  • CW recordings don't need the download. If a CW recording shows No Morse decoded, the recording may hold no clean CW, or the signal was too weak or noisy.

Call signs are wrong#

On noisy HF audio Whisper often gets a letter or two wrong. Help the finder:

  • Import your logs. Calls one letter away from a station in your log are corrected to it.
  • CALL SIGNS › LISTS › Update Lists from the Internet for current prefixes and active calls.
  • Correct or delete wrong calls yourself: see Adding, correcting and deleting call signs.
  • Raise Conf ≥ in the title bar to hide low-confidence guesses.

♪ AUDIO finds no recordings for a QSO#

  • Widen the window in OPTIONS (up to ±2 h and ±25 kHz, or any frequency).
  • Check the card with that day's recordings is linked and inserted.
  • Check Radio Clock Is: if the radio's clock was on local time, the recordings' times won't line up with the UTC times in the log.

Factory reset#

QUICK › Factory Reset… erases the app's own data and restarts it. Choose how much:

ChoiceErasesKeeps
Transcripts & Call SignsAll transcripts and the databaseSettings, bookmarks, imported logs, speech models
Everything Except Speech ModelsAlso settings, bookmarks, searches, imported logs and downloaded call listsThe Whisper models
EverythingAll of it, like a new installNothing. The models download again when next needed

An Are you sure? screen lists what will be erased, with No selected. Recordings on SD cards are never touched.

© RemoteTx® · remotetx.net · Manual built 2026 · Updated 2026-11-19