RemoteTx Manual
remotetx.net

Opening recordings

The player doesn't search your drives by itself. You show it where the recordings are once, and it remembers.

The preferred way is to copy the SD card to your computer and open the copy with the player. You can read straight from the SD card if you need to, but it isn't the preferred way.

Copy the card to your computer (preferred)#

  1. Make a folder on your computer for the radio's recordings, e.g. Documents\IcomVoiceFiles\.
  2. Take the SD card out of the radio, put it in the computer, and copy the card's contents into that folder. Keep the folder layout as it is: IC-xxxx\Voice\YYYYMMDD\YYYYMMDD_HHMMSS.wav.
  3. Eject the card and put it back in the radio.
  4. In the player press OPEN… (left side, or Ctrl+O) and pick the folder on your computer, or drag it onto the window.

Why a copy is better:

  • The card goes back in the radio straight away and keeps recording while you listen, search and transcribe on the computer.
  • Your recordings are kept when the card fills up, is reformatted or gets lost.
  • It's faster. Searching, transcribing a whole folder and finding the audio for a QSO are quicker from the computer's disk than from an SD card.
  • Nothing goes missing. A folder on the computer is always there, so it never shows NOT IN, and its bookmarks never show MISSING.

Adding new recordings later#

Each time you take the card out of the radio, copy its contents into the same folder on the computer again. New date folders are added beside the ones already there. Then press REFRESH on the PLAY FILES screen, or restart the player.

⚡Important

The card still holds the recordings you copied last time, so the computer will most likely ask whether to replace files that are already there. Don't replace them. Skip those files and copy only the new ones.

  • Windows: choose Skip these files. Only the new recordings are copied.
  • macOS: don't click Replace. On a folder, Finder's Replace swaps out the whole folder on your computer, which would lose recordings you've since erased from the card. Hold the Option key and choose Merge (or Skip when it's asked about single files), which adds the new recordings and leaves the ones already there.
✅Tip

With more than one radio, copy each card into the same folder on your computer so their IC-xxxx folders sit side by side, e.g. IcomVoiceFiles\IC-7300MK2\ and IcomVoiceFiles\IC-7610\. Open IcomVoiceFiles once and both radios are linked.

Other ways to open recordings#

  • OPEN… also accepts an IC-xxxx folder, a Voice folder, or a single date folder.
  • Drag a folder or a single .wav file onto the window. A dropped .wav starts playing straight away.

Reading straight from the SD card#

If needed, you can open the card itself: press OPEN… and pick the SD card, or drag it onto the window. SD CARD → SCAN searches drives C: to Z: for an IC-xxxx\Voice folder.

ℹ️Note

This works, but isn't the preferred way. The card has to stay in the computer while you use the player, everything is slower, and the recordings are only as safe as the card. The player only reads the card; it never changes it.

Several radios or cards at once (linked cards)#

Every folder or card you open is linked, and all linked folders are browsed and searched together. Picking a folder that holds several IC-xxxx folders links them all. (The player calls each linked folder a "card", whether it's a copy on your computer or an SD card.)

  • PLAY FILES lists the date folders of every linked card, newest first, with a Radio column. The All radios ▾ button in the title bar (or R) shows one radio only.
  • SEARCH and the LOG screen's ♪ AUDIO look through every linked card, or only the radio chosen with All radios ▾. Results show which radio made each recording.

The SD CARD screen#

SD CARD (left side) shows every card the player knows about and whether it's linked.

KeyWhat it does
SCANSearch drives C: to Z: for radio cards
▲ ▼Move the selection
UNLINK / LINK (or L)Remove the selected card from the list, or add it back. Nothing is deleted
✎ NAME (or N)Give the card a name of your own, handy for two radios of the same model
OPENGo to PLAY FILES

A linked card that isn't connected shows NOT IN and is skipped until it's back. Linked cards are reopened every time the app starts.

What the player reads from each file#

The radio writes each recording as Voice\YYYYMMDD\YYYYMMDD_HHMMSS.wav, with an information block after the audio. For example, from an IC-7300MK2:

INAM  IC-7300MK2 Voice Recorder Data  14.262.40 USB    RX 2026-10-25 01:27:19
ICMT  S9 / 47%
ISFT  IC-7300MK2 Ver1.02

From that the player shows the RX or TX badge, the frequency and mode, the S-meter for received audio or the power for transmitted audio, the length and the time.

Dual-receiver radios such as the IC-7610 record both receivers in stereo (MAIN left, SUB right) and write both frequencies, which band was active, and two S-meter readings:

INAM  IC-7610 Voice Recorder Data  18.134.00 USB    14.265.00 USB    M  RX 2025-04-11 17:26:10
ICMT  S6    S0 / 30%

For these files the play screen adds a MAIN / SUB line with the active band highlighted, and file lists tag SUB and MAIN+SUB recordings.

Times: UTC or local#

The radio stamps each recording with its own clock. The player assumes that clock is UTC. If your radio is set to local time, change QUICK › Radio Clock Is to LOCAL.

The UTC TIME / LOCAL TIME key (right side, or T) switches every date and time on screen between UTC and this computer's local time, including daylight saving: status bar, clock, file lists, search results, File Information and the search form. Search dates and times are typed in the zone shown. Folder names always stay as the radio's own dates.

© RemoteTx® · remotetx.net · Manual built 2026 · Updated 2026-11-19